Positest at a automatic adhesion tester manual

Manual adhesion tester

Add: qovaji26 - Date: 2020-12-05 08:57:53 - Views: 9370 - Clicks: 8981

Defelsko PosiTest AT-M Manual Adhesion Tester. POSITEST AT-A AUTOMATIC ADHESION TESTER from DeFelsko measures coatings adhesion on metal, wood, concrete, and other rigid substrates. PosiTest AT-M Manual, Adhesion Tester - Concrete Kit. Both the PosiTest AT-M manual and PosiTest AT-A automatic models compensate for misalignment. An electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. The self-aligning, quick-coupling actuator and spherical articulation dolly head enable uniform distribution of the pulling force over the surface being tested, preventing a one-sided pull off. PosiTest AT-Manual Adhesion Test Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke Pull Rate Indicator to manually monitor and adjust the rate of pull Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls. Portable, hand-operated instrument can be used in any position and requires no external power source-ideal for the lab and on-site.

The test area of the coating is separated from the area surrounding the dolly by cutting or drilling. Pull-off Test a) PosiTest AT-M (manual) (see pg. Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cell Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data. Binks Airless Automatic Model 550;. No twisting, pumping or cranking. Four models to choose from: 20 mm dollies 50 mm dollies 50 x 50 mm Tile Kit 50 mm C1583 Kit The PosiTest AT-A Automatic Adhesion Tester conforms to national and international standards for pull-off adhesion testing, including ASTM D4541/D7234 and ISO 4624/16276-1. The Manual and Automatic PosiTest Adhesion Testers are calibrated against known conditions using NIST traceable equipment.

Manual Adhesion Tester - Dolly size & standoff: 50x50 mm, Typical applications: Tile Adhesion Strength Conforms to EN 1-2. The new PosiTest Adhesion Tester measures adhesion substrates. The DeFelsko PosiTest AT Pull-off Adhesion Tester is ideal for measuring coating adhesion to metal, wood, concrete, and other rigid substrates. 20-millimeters size. Both the PosiTest AT manual and AT-A automatic compensate for misalignment. 8 MPa /psi /N.

Both models have a hydraulic pump. The PosiTest ATPull-Off Adhesion Testermeasures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Revolutionary self-alignment feature and pull rate indicator. PosiTest ® AT-M Manual Adhesion Tester AT-M Manual AT-A Automatic PosiTest ® AT-A Automatic Adhesion Tester Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure at a user-specified rate Test with the simple push of a button. Introduction The portable, hand-operated PosiTest Pull-Off Adhesion Testermeasures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The PosiTest AT-M Manual Adhesion Tester features a manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke, a pull rate indicator to manually monitor and adjust the rate of pull, and an internal memory that stores all the data of a pull-off test for up to 200 pulls. The DeFelsko ATM20 PosiTest AT-M Manual Pull-off Adhesion Tester with 20mm Dollies Kit ATM20A is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure.

The PosiTest Adhesion Tester compensates for misalignment. The system uses its hydraulic pump to pull the dolly which has been glued to substrate and record the force applied when the failure happens. Available in both manual and automatic models. A manual hydraulic pump is designed to apply smooth and continuous pressure with a single stroke. 3 PosiTest AT-A (automatic) PosiTest AT-M (manual) Seite 3 Introduction The PosiTest AT Pull-Off Adhesion Tester measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Seite 1 Pull-Off Adhesion Tester Quick Guide v.

What is a positest adhesion test? Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cell Internal memory stores positest at a automatic adhesion tester manual maximum pull-off pressure, pull rate, positest at a automatic adhesion tester manual test duration and dolly size for up to 200 pulls Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data. The PosiTest AT Measures adhesion of coatings to metal, wood, concrete and other substrates - Revolutionary self-alignment feature and pull rate indicator brings new meaning to adhesion measurements. Elcometer 510 Automatic Pull-Off Adhesion Gauge.

Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583. PosiTest Pull-Off Adhesion Tester Measures adhesion of coatings to metal, wood, concrete and other rigid substrates. Click here to download the video script in English. The new PosiTest Adhesion Tester measures adhesion of coatings applied on metal, wood, concrete and similar substrates. The PosiTest AT-M Manual Adhesion Tester by DeFelsko Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The PosiTest AT has an environmentally sealed enclosure that meets or exceeds IP65, making it dustproof, waterproof, and shockproof. POSITEST ATA50C-B AUTO W/ 50MM C1583 KIT Part Number: ATA50C-B.

Analysis of Test Results The dolly and the coating are examined and evaluated to determine the nature of the coating failure. Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable adhesion strength results. Measures the force required to pull a specified test diameter of coatings or material away from its substrate using hydraulic pressure; 50mm C1583 dollies and stand off - ideal for concrete surfaces and overlays; Automatic model electronically applies smooth and continuous pressure. What is an automatic pull off adhesion gauge? In stock Add to Quote Cart for pricing. The PosiTest AT Pull-Off tester measures the adhesion of coatings of metal, wood, concrete and other rigid substrates. The DeFelsko ATM50C PosiTest AT-M Manual Pull Off Adhesion Tester with 50mm C1583 Kit is a precision instrument that measures adhesion of coatings to metal, wood, concrete and other substrates - Revolutionary self-alignment feature and pull rate indicator brings new meaning to adhesion measurements. PosiTest® Pull-Off Adhesion Tester-AT-A Automatic and AT-M Manual.

What does positest stand for? The self-aligning, quick-coupling actuator and spherical articulating dolly head enable uniform distribution of the pulling force over the surface being tested, preventing a one-sided pull-off. The pressure is displayed on a digital LCD and represents. Automatic Adhesion Tester The PosiTest Automatic Adhesion Tester Is Vastly Improved and measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. To obtain more repeatable and meaningful adhesion measurements, it is imperative that the pulling force applied to the test dolly is uniformly distributed over the surface being tested. PosiTest Pull Off Adhesion Tester measures adhesion of coatings to metal, wood, concrete and other substrates.

Defelsko DOLLY20 Dolly for PosiTest AT-A Automatic Adhesion Tester, Pack of 10 DOLLY20 Single-use, self-aligning dollies ensure even, consistent pull-offs. DeFelsko devised PosiTest Adhesion Tester for quality inspection on adhesion of a coating or several coated sample of any paint product is measured by assessing the minimum tensile stress needed to detach or rupture the coating perpendicular to the substrate. PosiTest - Pull-off Tester The pull-off adhesion tester measures coating adhesion on metal, wood and other rigid substrates. Conforms to national and international standards including ASTM D4541/D7234, ISO4624/16276-1, AS/NZS 1580. PosiTest AT The PosiTest AT series calculates the adhesion of coatings to metal, positest at a automatic adhesion tester manual wood, concrete and other rigid substrates through measuring the force required to pull a specified test diameter of coating or material away from its substrate using hydraulic pressure. Over 50 Years of Quality positest at a automatic adhesion tester manual · Made in USA Uniform pull-off force Stand-off Quick Coupling Adhesive (uneven bond-line) Coating.

Measures the adhesion of coatings to metal, concrete, plastic and more. A Certificate of Calibration containing actual measurements is included with every tester. More Positest At A Automatic Adhesion Tester Manual videos. 6) b) PosiTest AT-A (automatic) (see pg. DeFelsko ATA50 PosiTest AT-A Automatic Pull-off Adhesion Tester with 50mm Dollies Kit ATA50A-B Typical Applications: Coatings on Concrete, Wood and Plastic Range 0.

Page 3 Step 1: Dolly & Coating Preparation Step 1: Dolly & Coating Preparation Dolly Preparation 1. Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable results Set adjustable pull rates @ 0. There is a manual and an automatic model available. DeFelsko PosiTest AT Manual and Automatic Pull-off Adhesion Testers Pull-off Adhesion Tester for measuring coating adhesion to metal, wood, concrete, and other rigid substrates.

PosiTest® AT-M Concrete Kit Adhesion Tester with Pelican Case; Calibrated and certified to ± 1% accuracy using a NIST traceable load cell. Pull-off Test a) PosiTest AT (manual) (see pg. How does positest at-m work? 2 MPa/s (30, 50, 100, 150, 180psi/s). Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.

Ensuring consistent, repeatable pull-off adhesion test results on a wide range of substrates - the Elcometer 510 Automatic Pull-Off Adhesion Tester is now better than ever, thanks to an update to the gauges’ attributes feature. The Positest AT-A Automatic Adhesion Tester measures the force required to pull a specified test area of coating away from a substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating&39;s strength of adhesion to the substrate. The pump of the automatic version is electronically controlled and applies smooth and continuous pull-off pressure.

Positest at a automatic adhesion tester manual

email: exokoc@gmail.com - phone:(229) 135-8516 x 7318

Dukes motor fan 4544-00-5 manual - Manual training

-> Schott ceran 9000 manual
-> Manual de orientação ao consumidor

Positest at a automatic adhesion tester manual - Manual texas dodge


Sitemap 1

Vizio sound bar sb3821 c6 manual - Comand generador manual power